O ring size

[The Dutchman]

What size o ring do you use for rigging senkos wacky style?

[mohawkman]

5/16" I think

[Cub48]

The orings that comes with the tool was cutting my worms into after i caught a fish  or so. I ordered some 1/2 " they worked good on the worms i pour and ok on senko. The senko are a little smaller than the injected worms i shoot. 7/16 might work if u have the smaller worm. I use 2 orings and x them put the hook thru the x it keeps the hook straight. Cub48

 

[mark poulson]

11 hours ago, Cub48 said:

The orings that comes with the tool was cutting my worms into after i caught a fish  or so. I ordered some 1/2 " they worked good on the worms i pour and ok on senko. The senko are a little smaller than the injected worms i shoot. 7/16 might work if u have the smaller worm. I use 2 orings and x them put the hook thru the x it keeps the hook straight. Cub48

 

 

I had that "cutting into my worms' problem, too, until I started using the glass blast media in my ES Senko mold.  it makes a much more durable worm, with the same fall rate as the original, and the same wiggle,  as long as I add enough softener.