Jump to content
bryanmc

Looking for a gear motor fan.

Recommended Posts

I know it's a long shot, but does anybody know where you can get a replacement fan for the gear motor (I think it's a Dayton) we use on presto pots.  Mine's in pretty bad shape and I'd like to replace it.  I saw one somewhere a year or so  ago when I was looking for something else but can't find it again.   

Thanks.

Link to post
Share on other sites
On 3/9/2021 at 8:16 AM, SlowFISH said:

McMaster Carr should have a bunch - just look at spec on the one you have. Look for Compact AC Gearmotors.

I contacted them.  They don't carry Dayton motors so they don't have any parts.  They suggested contacting the manufacturer, but I can't find any info on Dayton. 

Link to post
Share on other sites
10 hours ago, jigmeister said:

Graingers carries  Dayton brand gear motors 

I wasn't able to find the fan listed in the parts section.  Did you see it somewhere?

Link to post
Share on other sites

How big of a motor is this ( 1/10 horsepower  for example ) and is it an AC , DC , or Universal motor ?   Is there a nameplate on the motor you're replacing?  If you can't specifically find a Dayton you could use a different brand with the correct rating and physical size . Can you post a picture of the motor and nameplate 

Link to post
Share on other sites
2 minutes ago, jigmeister said:

How big of a motor is this ( 1/10 horsepower  for example ) and is it an AC , DC , or Universal motor ?   Is there a nameplate on the motor you're replacing?  If you can't specifically find a Dayton you could use a different brand with the correct rating and physical size . Can you post a picture of the motor and nameplate 

The motor is an AC gear motor  Dayton model 1LNG1.  The fan is a 4 blade plastic one.  

Here the product info from the grainger website:

 

 

1lng1.png

Link to post
Share on other sites
6 hours ago, jigmeister said:

I searched Ebay  with the Dayton 1LNG1 model number and several came up there also

You must have missed that I'm only looking for a replacement fan for that motor, not an entire motor.  ;)

Link to post
Share on other sites

Sorry about the misunderstanding on my part . Speaking of parts though I did find Dayton part # for just the fan for your motor     Dayton # 46-6-3         Grainger should be able to get this part being a Dayton distributor 

 Grainger also  sells a Dayton 4 blade 2.5" plastic fan  # 5JKL5 that could be a match  for your motor 

 

 

 

 

Edited by jigmeister
error
  • Like 1
Link to post
Share on other sites
Posted (edited)
13 hours ago, jigmeister said:

Speaking of parts though I did find Dayton part # for just the fan for your motor     Dayton # 46-6-3         Grainger should be able to get this part being a Dayton distributor

I also found that number (46-6-3) through one of the PDFs attached to the listing for the motor.  Called Grainger and it's no longer available, but he did give me some numbers for a couple that may work.   Just need to find some calipers to get a reasonable measurement of the shaft it goes on.  Thanks 

Edited by bryanmc
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...
Top