robbor Posted July 26, 2021 Report Share Posted July 26, 2021 (edited) Im going to have to put my vulcanizer in storage but before i do i want to make a few crappie jig head molds. 1/32 thru 1/4 oz. Wondering if i should make them on a 9" mold or 12" mold? For u guys who cast about how many heads are you putting in either mold? I dont think its worth the expense to go larger than 12" . My vulcanizer goes up to 18. And i think i have mold frames up to 24". Ill probably make 3-4 molds, one for each size head. I have aluminum original master molds i made years ago for my crappie heads on the heavy side so they will still come close to desired weight after mold shrinkage and compression. Not sure if im going to go with multi layer red and white or blue nicem. figure the molds will about last me forever either way. Edited July 26, 2021 by robbor Quote Link to comment Share on other sites More sharing options...
dlaery Posted July 26, 2021 Report Share Posted July 26, 2021 9" - 28 to 35 parts 12" will get about 30% more, not worth it me. 1 Quote Link to comment Share on other sites More sharing options...
Munkin Posted August 5, 2021 Report Share Posted August 5, 2021 9" the 12" is for spinnerbaits. Allen 1 Quote Link to comment Share on other sites More sharing options...
robbor Posted August 9, 2021 Author Report Share Posted August 9, 2021 Thanks guys. getting my master molds out of storage and then ill get a case of silicone and start. 1 Quote Link to comment Share on other sites More sharing options...
