Jump to content
cadman

WTP 3D molded eyes

Recommended Posts

Does anybody have actual caliper dimensions of the following WTP 3d eyes. Barlow's has overall even fractions, but I would like to have the  dimensions of the diameter in decimal (thousands). for example: 4 MEY is approx (.231)

4-1/2 MEY

5 MEY

5-1/2 MEY

6 MEY

6-1/2 MEY

7

7-1/2 MEY

I'd like to order eyes but I want to make sure of the diameter.

I called WTP today, but they are closed until Jan 3rd.  Any help would be appreciated.

Edited by cadman
Link to comment
Share on other sites

Here is what I measure them at...

1/8 - 0.117
5/32 - 0.154
3/16 - 0.180
7/32 - 0.215
1/4 - 0.233
9/32 - 0.276
5/16 - 0.292
3/8 - 0.363
7/16 - 0.434
1/2 - 0.481
9/16 - 0.555
5/8 - 0.633

These are my approximate measurements.  All measured with calipers...not converted from fractions.  Since I do not order them I do not know what the MEY of each is.

JB

  • Like 1
Link to comment
Share on other sites

8 minutes ago, JBarlow said:

Here is what I measure them at...

1/8 - 0.117
5/32 - 0.154
3/16 - 0.180
7/32 - 0.215
1/4 - 0.233
9/32 - 0.276
5/16 - 0.292
3/8 - 0.363
7/16 - 0.434
1/2 - 0.481
9/16 - 0.555
5/8 - 0.633

These are my approximate measurements.  All measured with calipers...not converted from fractions.  Since I do not order them I do not know what the MEY of each is.

JB

That is excellent information. I can decipher everything from the info you provided. Thank You, hopefully you have most of these in red. I will be placing an order tomorrow.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top