Jump to content
Nruds

Electrostatic Conveyor Painting

Recommended Posts

Hi

 

Looking for some more information on electrostatic conveyor painting system for lead heads. 
 

specifically a gun/ paint box set up that only coats the top half of the jig and the recovery system. 
 

from what I gather there are systems out there that don’t require the jugs to be masked off. Any insight into this would be much appreciated 
 

 

 

04CEFAF4-3187-4DF2-803B-C2FFADE4CA6C.jpeg

049537CE-6D2D-46F2-9C22-72438F85D646.jpeg

Link to comment
Share on other sites

When I learned about electrostatic paint from my wrought iron fabricator (twenty+ years ago), he said the two main advantages to it were far less waste, because the atomized paint was attracted to the electrically charged metal, and the complete coverage, because the paint mist was attracted to any uncovered metal surface.

I doubt you'll be able to coat only part without some kind of masking.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top