bklynfly Posted November 29, 2022 Report Share Posted November 29, 2022 Hi everyone, First time poster, but avid reader here. A buddy of mine is going on a peacock bass trip and asked me if I could tie Hine some poppers to match the attached image. Has anyone seen plastic chopper blades like the ones pictures? I've only ever seen metal ones. Thanks in advance. Best, Chris Quote Link to comment Share on other sites More sharing options...
Big Epp Posted December 1, 2022 Report Share Posted December 1, 2022 Those look really cool! It's a bit of a stretch, but you could make something like this with the Motts applesauce pouch lids. https://www.amazon.com/GoGo-squeeZ-Fruit-Apple-Pouches/dp/B001VJ70UC/ref=asc_df_B001VJ70UC/?tag=hyprod-20&linkCode=df0&hvadid=312198206296&hvpos=&hvnetw=g&hvrand=14235360717593858131&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9021688&hvtargid=pla-570843406953&psc=1 Quote Link to comment Share on other sites More sharing options...
swimb8s Posted December 2, 2022 Report Share Posted December 2, 2022 Welcome to TU , Seems I can see ridges or bumps , I think they are 3D printed parts 1 Quote Link to comment Share on other sites More sharing options...
Big Epp Posted December 5, 2022 Report Share Posted December 5, 2022 On 12/2/2022 at 4:51 AM, swimb8s said: Seems I can see ridges or bumps , I think they are 3D printed parts Good observation! I hadn't noticed that. Quote Link to comment Share on other sites More sharing options...
bklynfly Posted December 6, 2022 Author Report Share Posted December 6, 2022 On 12/4/2022 at 7:56 PM, Big Epp said: Good observation! I hadn't noticed that. I thought the same! I printed a few and they're a lot more fragile than I'd like. But, it's promising. 1 Quote Link to comment Share on other sites More sharing options...
Nathan Posted December 27, 2022 Report Share Posted December 27, 2022 These might be a bit small..worth checking..Nathan https://www.scheels.com/p/northland-butterfly-blade/84948-BFB.html?cgid=fishing-spinner-rigs-and-components#start=2 1 Quote Link to comment Share on other sites More sharing options...
