Tracy G
-
Posts
256 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Posts posted by Tracy G
-
-
Love It!!!
-
This (and my lack of painting ability) is why I like the building aspect of this hobby.
-
I use the 100% acetone fingernail polish remover. Even use it to thin my epoxy with no problems.
-
I always use twisted ss wire for my bass size cranks. I use a 3\16" pine dowel for to anchor the rear hook hanger in. It holds the twisted wire better than the balsa ( just a little reinforcement). I anchor the belly hook hanger in the ballast weight. Hope this helps. Feel free to pm me if you need to.
-
Yeah S56, the other thing I have been battling is tightening up the wiggle. I have split the weights up and moved the line tie up some and I think I'm headed in the right direction. Hopefully I can achieve a tight fast wiggle. I really wanted to use balsa wood since it is so easy to shape and my depth goal is 8-10ft everything down here is so shallow. I think JRammit may be right the buoyancy of the balsa may be the biggest part of my problem.
Try building one with cedar. The main thing to remember is to give the grain a little extra attention while rough sanding. If you don't, the grains of the wood will make small protruding lines. You can probably cut the amount of ballast by at least 1/2 (just a starting point). I think you would be pleased with the results.
-
1
-
-
As a kid I made bobbers out of styrafoam found on the side of the road, or sections of cane that I would harvest off the creek bank and dry in the sun. Then I started getting into my mom's sewing box for thread, and chasing our game rooster to pluck some tail feathers for flies (I wonder why he hated me so much). I took a break while in the Army.
First crank was made a few years ago out of a spruce 2x4, sealed and painted with my wifes fingernail polish. It worked well enough to catch an 8 lb bowfin, but is sitting on a shelf in my living room now.
-
I'm not sure what the size is, cause I have used the part with the size written on it, but it's roughly 1/8".
I got it from a Lowe's store.
-
Acrylic will crack really easy. Use polycarbate (a common name brand is Lexan). I trace the out line of a lip on the polycarbate sheet then use sharp tin snips to cut just outside the lines, then I use a sanding drum on my dremel to sand it down to inside the lines.
-
Hey Rob, maybe you can throw in some twisted steel hook hangers as well. Just shooting you an idea. Best of luck to you on your expansions.
-
Put another thin epoxy coat on it is the only thing that you can do. This happens to me all to often.
-
1
-
-
I usually hit both parts of my D2T with my hair dryer in cold weather, so they become more runny and easier to squeeze out and mix. The resin is always thicker than the hardener, at least for me.
An associated question. Is there an epoxy that will prevent me from dropping a freshly coated lure onto my garage's carpet strip? Hahaha
I do this when one part of my epoxy starts looking "milky". Another optiion, if the container is water tight, is to run a pan of hot water to set the bottle in for a few minutes.
-
1
-
-
Please tell me that this post is a joke.
-
What kind of oder?
-
Very good idea. Thanks for sharing.
-
I have about 3/4 of a jar left. It did the same thing for me.
-
I always throw my handmade baits before painting them. I often catch fish on test runs, in different bodies of water.
-
-
I think that mine would have to be shad patterns (purpe in paticular) because of the simplicity and they flat out catch fish here.
-
That will work too Nate. Wonder if any of the younger guys have a clue as to what we're talking about.
I do. Lol.
-
I usually cut the slot while the bait is still square, and install it before the epoxy seal coat. It is a pain but I started doing this so I could test swim them before paint and never have changed my ways.
-
I hope all of the dads and stepdads out there had a great day today.
-
I am looking forward to giving them a whirl as soon as you make them available.
-
I was just wondering. We are having our annual Tyson tournament on the same date.
It would be hard for me to meet that timeline with my work schedule. I would like to wish you good luck though.
-
That tournament wouldn't happen to be on Bull Shoals, in Arkansas, would it?
Just asking because I just painted 12 baits for a guy to use in that tournament.
A Talented Guy Shared His Technique
in Hard Baits
Posted
They changed the privacy settings on the page to closed group, so you won't be able to see it unless you are a member there. It's a good group of people and pretty well maintained. I think they are accepting requests, they just try to keep the telemarketers and such out.