alcapone2005 Posted April 12, 2010 Report Share Posted April 12, 2010 Sorry....I'm new to this site and sent my request to the wrong forum...So I'll try again.. I'm looking for info. on the things I need to produce my own floating jig heads, such as types of molds, proper hooks, and types of head materials. Any help I can get no matter how trivial would be a big help. Until then "TIGHT LINES" Quote Link to comment Share on other sites More sharing options...
DDSBYDAY Posted April 13, 2010 Report Share Posted April 13, 2010 Sorry....I'm new to this site and sent my request to the wrong forum...So I'll try again.. I'm looking for info. on the things I need to produce my own floating jig heads, such as types of molds, proper hooks, and types of head materials. Any help I can get no matter how trivial would be a big help. Until then "TIGHT LINES" polystyrene-(expandable beads) This is the stuff commonly called styrofoam. Can be purchased at Barlows. Use the same hooks and any molds you want. This thread will give you more info. http://www.tackleund...__fromsearch__1 I'm sure there are some floating foams that could be used also but I can't help you with that. Quote Link to comment Share on other sites More sharing options...
