b75nweav 17 Posted February 17, 2009 Report Share Very nice!!! What did you clear coat it with? Quote Link to comment
KAOS Tackle 10 Posted February 17, 2009 Report Share Very carefully with Etex. Trying to find a good rattle can urethane alternative though. Quote Link to comment
mark poulson 2,552 Posted February 17, 2009 Report Share Very nice. You must have the patience of Job to be able to epoxy that lure without fouling the hinges. Quote Link to comment
StoneCoal Tackle 10 Posted February 18, 2009 Report Share Good looking bait. As for the rattle can urethane give MinWax Spar Urethane a try. It has worked well for me. You can find it at WalMart or Lowes in a dark green can, available in satin or high gloss. I do three or four coats about 15 min. apart (no turning needed) and let it cure for 72 hours. Scuff it up with 400 or 600 grit paper and put on another four or five coats, letting it tack up 15 min. or so between coats. It's not as tough as Devcon but it serves my purpose. Hope this helps. daymon Quote Link to comment
Recommended Comments
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.