DR609BASS

Thanks guys good stuff

Hey guys I was wondering if adding small glitter to powder paint would work? Does anyone do this also?

OK thanks!

OK guys thanks I just worried because the 68s seem to be made of a softer plastic then regular 6 inch ones. Have you guys done this the the 68 special version?How long should I dip them in 30 seconds? And hang them by some line to and air dry right?

Sorry I hit post before I was done haha. The tails on the swim baits are bent from the way it was packaged and sent to me. Does anyone boil swim bait tails to fix this? I've seen videos of people doing that to regular Huddleston but the 68 special have softer plastic. Also how long if anybody does this. If someone can help that would be awesome thanks.

Hi guys I no this isn't a post about making soft plastics but I was wondering if anyone of the soft plastic forum that has huddle can help me with somthing.

Thank you guys. Very good advice and tips! I can't wait to catch some hogs on my jigs, spinnerbaits, and chatterbaits this spring!

Hi guys. I am going to make spinnerbaits and make some chatterbaits for myself with the spinnerbait heads. I've tried using the coffin style blades from lurepartsonline and attaching them with 2 split rings on some of my weedless brush jigs with not so good results. I then tried bending the blade back towards the head slightly and it seemed to help but didn't completely stop the blade from rolling over and not vibrating during part of the retrieve.That is why I'm going to make some out of spinnerbait molds. I also bought the more rounded style blades vs the coffin style this time. My question is do others bend the blade back like I mentioned to get a better action? And also tips for chatterbait marking. Im going to make them With the ultra minnow spinnerbait mold the smaller 1/4 to 1/2 oz size mold.Any responses will be much appreciated! Thanks

Thanks for all the input guys. I'm gonna buy some pins and hopefully my jigs will be good this time!

Thanks!

I guess the picture didn't work sorry

Hi guys I've recently just started making jigs. I have the do it weedless brush jig mold I use the 1/8th inch weedguards. I'm am having some trouble with the weedguards becoming soft and flaring out when I heat my jigs up to powder paint. Im using a heat gun.I have the heat resistant tubing that do it sells and I still am having issues with my weedguards. What is the best way to powder paint the jigs and have the weedguards not be affected? I was planning on buying the Teflon inserts that janns net craft sells. Powder paint with them in, pop them out and then use like the devcon 2 ton epoxy to put in the weedguards is that my best bet? I attached a picture of my jigs I just made with the weedguards flared out to show you guys. Any response will be much appreciated!!!