[New guy needs some advice.]

If you plan on making two color baits go ahead and buy the dual. Save you from doing it later.

[Soft plastics drying too quick]

You may want to heat your injector as your plastic heats. I stick mine on a hot plate.

[Plastic Bags]

Clearbags

[Vacuum Chamber]

I don't have a vacuum chamber but pretty sure you use it before heating. 

[Jig head flat spot]

I take it you're using a 1\2 oz mold, does a 1\16 of an ounce really make that much difference in a football head?

[Can I freeze deer tails for making wire lures later in the year?]

I would suspect you should be able to freeze. They freeze most all animals before mounting.

[If Not MF Who Will You Order From?]

I already buy my plastics there. Most my colorants come from MF. 

[Attention Mold Manufacturers]

Would be nice if you engraved your company name on molds. If I want to order additional molds or even sell them us old farts can't remember where they came from!

[Dual injection jerk bait bleeding]

My fluke mold does this as well. I suspect the plastic, not exactly sure how to say it, pools up trying to push into the narrow tail causing the two colors to mix. A lot of commercial baits have this issue as well.

I shot at a lot of different temps and still get it to some degree.

[Can Old Color Dyes Be Saved?]

You sure it wasn't powder? Have a few bottles of really old that were powder. Not as easy to use as liquid but for solid colors such as black it worked fine. Was hard to measure.

[Outsourcing production to plastic injection companies]

Contact Leonard at baitjunkies. 

[How moves a horizontal tail?]

Use as a trailer on a charter bait and see what happens!

[Screw in belly weight mold]

I've used the do-it-yourself stand up head for soft plastics. Pour it without the hook. 

[Curious]

The flat bottom actually gives the bait more action. A round bait displaces less water. 

[Powder not fluidizing]

Some cheap powders don't "fluidize". I've seen this with some Harbor Freight powders.

[Gas, massive bubble release post set up temp]

Been pouring \ shooting a long time and never heard of this issue. I don't dip tubes so biggest batch is normally a fry daddy but have never seen it.

[mold extensions]

I made three different sizes. Depending on the mold I use the shortest you can get away with. Trial and error is the best way to decide which to use.

[Custom Foam floats]

Could you use something like the foam you spray in cracks?

[Zoom 6" dead ringer mold?]

I would love to have the 8"

[Scents and bait sauces]

I think it's more for the angler than the fish. Some guys swear by the Bait Fuel but it's water based. 

I do add scent to the baits I sell.

[Plasitol choice for Finesse baits]

I use baitplastics. 50% medium and 50% super soft.

[Need help with identification]

I have a chicken foot hand pour mold. It's old as the hills and have no idea where it came from. The mold I have appears to be a larger version of it.

[Mixing the Gallon Jug]

If you buy by the 55 gallon drum you can buy a drum roller.

[Bait Plastics]

I've used both as well and cannot really tell any difference. Couldn't really tell any difference in the smell. My shop smells like garlic so that's the only thing you smell.

[Mixing the Gallon Jug]

Find a big mouth gallon jug that a paint mixer will fit in. When you empty the contents out you may have to cut the bottom out and scrape what's settled to the bottom in your new jug.