brendandrage

Hi Griffo, I have just tried a 1mm deep recessed eye modification to the the same banana head mold to apply flat eyes and found that at this depth the wire and hook eye are exposed when pouring, having said this I had put the eyes up very high on the mold, I would like to see Basseducers directions for an adjustable modification.

Hi all, I have decided to dabble with a few crank baits and am happy with the progress of the pro to type so far but have hit a stumbling block with the bibs. The lures are for large Australian natives largely Murray cod, the lures will be deep divers to around 6-8 meters and made of balsa wood. The bibs themselves will be quite large and I would like to know what type of product to use, how to cut it and lastly how ensure a neat finish with consistent shape? I know I am asking a lot of questions that may have been covered in the past but I couldn't find any with the search feature. Thanks in advance legends!

Hi all, I was wondering if anyone could tell me if there is any advantages or disadvantages other than convenience of the tow point between the 2 options for spinner bait wires?

Hi all, Went to purchase some devcon 2 ton today and they tell me that they are no longer selling 2 ton and sold me some 5 minute instead has anyone used this product before what is the good the bad and the ugly on this?? Thanks all

Im not currently using any flux, just melting and cleaning the lead prior to use, there does not seem to be much if any granule impurities in the lead but maybe I do need to use a flux, thanks for your help guys. Regards Brendan

Thanks Cadman, I was thinking that would be the go but wasn't sure. Hawnjigs how could I clean them if it were gassing? Cheers

Hi there Skippy, Mate I am using roofing lead so should be fairly soft. Thanks

I am interested in making some soft plastics and would like to know if anyone can point in the right direction to purchase the ingredients in Australia? Cheers

The last lot of banana spinnerbaits I poured the lead has not gripped the wire shaft properly so you can feel the wire move inside the lead, anyone got some help with this one, also I am currently melting the lead over a gas burner with a pouring ladle and thinking of upgrading the a melting pot. I use do-it molds and wondering what type of pot to go for? Than ks in advance champs!

Hi Hazmail, Your lures look great mate,I had a crack at making a wooden version of a rapala clackn rap, not too bad for a beginner, but much room for improvement. I was wondering if someone out there may have a tutorial that shows how to refine or clean up the lures to get them symetrical after the rough cut out. That seems to be the bit I am failing at the moment. I am also wondering how work out where to attach the tow point. One other thing you may be able to help me out with is devcon 2 ton, apparently they are not selling it in Aus any more, any suggestions on a replacement? Regards Brendan Oh so many more questions.............

Hi all, I would like to start making some lipless crankbaits and would like to know if anyone has some tutorials on how to make them from scratch or if anyone knows where i can buy some good quality different shape blanks? I am looking to make similar size to the lake police style if this helps. Regards Brendan

Yes i think your right, i have so many different colours and types of paint. I ended up giving some to the kids just to get rid of some...lol:D

Hi all, I am looking to order some more blades and swivels for spinnerbaits, I normally order from Barlows just thought id ask if anyone has a better suggestion for me.

Hi all, The white base coat certainly helped but still not rapped about the outcome, might shelve this one for a while and try your suggestions Cadman. Thanks all

Thanks guys, I will try a white base coat on the weekend and see how it goes. Regards Brendan

Hi all, I recently bought some green glo powderpaint, and I am not happy with the finished product. I heated as per normal and dipped in a fluid bed then baked as per the instructions but the finish is rough, blotchy and messy. I have applied 5 coats to each bait but there all the same. Anyone got the news on how to get the right finish with this stuff? PS CS Coatings product:eek:

PS Sorry for the time delay in my posts I am in Australia. Anyone else here from Australia?

Hi All, Thanks for the feedback and information guys, I am sure I will be trying all suggestions, Cadman, firstly let me say I endevour to finish a lure like yours! simply stunning. Mate, I am using a 5/8 Banana mold I am wanting to paint the eyes not so much in the traditional black on white but moreso in a single colour in a pattern. I can email a sample of what i'm after if you like. I am guessing the same rules would apply to apply a red stripe underneath the lure as well for a bit of colour flash. I have sent through my email addy. Thanks Brendan

Hi all, this is my first post and I would like to thank you in advance for your assistance. I have been making my own spinnerbaits for a while now and would like to upgrade them to painted eyes. I have been trialing the nail head method but have found it difficult to get a nice uniform round profile. I am powder painting the heads and using water based model paint for the eyes. Can anyone give me some further ideas on how to get this process right?. I would also like some advise on how to get the positioning consistant. Cheers Brendan