bigblue2
-
Posts
219 -
Joined
-
Last visited
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Everything posted by bigblue2
-
is there anyone using uv clear coat its something new for me but it seems to work well if you wait at least 4 hours to cure what is the reason for waiting so long?
-
sinks nice in water but have not tried in a lake yet! but should work well! -
-
-
want to hear a good one how about a automatic ballast system just set the perfect depth and the lure could maintain a given depth suspended?
-
I guess what I am really getting at can the correct weight balanced lure be so accurate to suspend at a given depth almost all the time?
-
so if the lure drops at say 1 ft per second that would be a good measurement to go by if the lure weight is less it seems that it does not balance out the body so I have to get a standard weight to go by so each lure acts the same or close to it?
-
is there some kind of time measurement of sinking rate say a foot per second compared to weight of lure I suppose?
-
I recently weighted some diver lure I made and water tested them in a 5 gallon pail the sink down fairly fast slightly resting on the bottom how deep do you think they will act when thrown in a lake will they flutter down and rest on bottom say 20 feet will they stop?
-
dave how much weight to sink a 120mm+10mm wood lure blank?
-
wood lure blanks from 3"to 7" floating and diving most with out hooks some do! at least 300 count at .20 per
-
I got a 60watt uv flood lamp really speeds up curing time only 3 hours compared to 10 hours really happy about that!
-
try harbor freight store!
-
I recently am trying out uv cured resin for clear coating it is taking a long time to cure under a 10 watt uv lamp anyone know why it is taking so long I have heard it is suppose to take a matter of minutes but it is taking hours what am I doing wrong?
-
why not try krylon in the can it might surprise you on how good it works!
-
I just started to use my 8-place drying wheel that I made with a small 12rpm motor I am using a 5-hour to 12 hour epoxy just waiting to dry hope it all works out!
-
what kind of lure is this got any more camera angles?
-
thanks for all the info my lures have been drying for 12 hours just a little tacky should be cured in 24 hours again thanks for all your inputs!
-
this is for my old resin mix just to get it to work until I get my uv activated resin!
-
hey bob thanks for answer to my question I am waiting 5 hours for tacky 24 cured hope my new stuff works!
-
i just purchased 2- 75 watt uv black lights and a bottle of uv resin should this work for clear coating lure blanks?
-
i just coated some lure blanks with a 2-part epoxy brand new bottle! how do you speed up curing time I mixed it 1:1 ratio?
-
I mixed up my last of old epoxy I had left and applied to sticky lures let dry for a few more hours and no more sticky coats thanks bobp!
-
the lures are still sticky after 12 hours drying time maybe I will have to add more hardner next time
-
I just purchased some 2-part epoxy and mixed it 1to1 ratio how long will it take to dry and cure to touch?
