Jump to content
4/0

Waspi head cement

Recommended Posts

I have some Waspi head cement and every time I use it it drys " milky looking " not clear. It is solvent based .  The thread is some Ultra and Danville 210 flat lightly waxed and also some polyester thread,, " milky " on all of these.

I would like to have something that I can have in a dropper bottle with a needle type tip as I am tying. Using Bucktail and sometimes some synthetic type hair from LPO.

Thanks.

Link to post
Share on other sites

It could be the solvent is reacting to the wax on the thread, I do not use any thread with wax on for my bucktails, and I use clear lacquer from the auto store, it is premixed and I just poke 2 holes in the top, and put screws in the holes to reseal it. my thread is nylon size a.

Link to post
Share on other sites

Thanks,

I used to use a lot of lacquer when I was building cabinets. Have been using some of the hard as nails because of the " milky" problem. The Waspi seems like it penetrating better but the end color is bad.

I'm using a throw away brush and this what it drys like on the bristles. The squeeze type bottle with the needle would be convenient.

 

waspi milky color 001.JPG

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...
Top