This is my second attempt at crank making. First one I used pine&through wire.This time went with Pvc and twisted stainless epoxied in.Gst top coat, lexan lip.Weighs 1oz without hooks.Tub test went good.Nice wide wobble
Been learning to airbrush the last 6 months and now just started to try and build crank baits. Figured I'd get decent at painting first that way when I carve an ugly bait I can make it look half decent
I like your videos. You make it look and feel like anybody can do it. Then reality sets in...and we realize a whole lot of experience and know how goes into making it look effortless the way you do. Definately a fan.
Very cool indeed. Almost makes me want to give it a try...oh wait ...still chicken..lol Between painting and topcoat I have to limit the stuff I can screw up on:-)
They look really nice..I would keep them too:-)
Btw..On the 5 inch crank..How is the line tie secured to the lip? Is it under the lip and through the bait?
Thanks Vodkaman, We've got a foot of ice here so it's the best I could do. Love ice fishing but can't wait to break the boat out and chase some spring walleye. A trolling walleye crank is the next challenge. Should be alot of trial and error with that one but I look forward to it. I really enjoyed the whole process.
Don't know if this is going to work but here's my high-tech swim test.
http://s1265.photobucket.com/user/itsagr8day4fishing/media/Lure%20making/0201142029_zpspjhtetns.mp4.html
On this particular lure it was pretty much outlined for me. I just made sure it was centered and closer to the front belly. Being a crank I wanted it to sit head/lip down a little so it would start diving sooner. I'm sure it's a careful balance of placement & weight but it worked out well on this one.
Nathan, I did the through wire because the diy steps I was following called for it & I wanted the experience. Over kill yes. I had balsa but thought the scrap pine I had laying around would be more forgiving when I made sanding mistakes. I also had the wire and no screw eyes...lol
Here are some shots of the steps I took.They were all firsts as far as wire bending,ballast & sanding ect. Things I learned along the way. Make sure to drill the ballast hole before making the slit for the through wire.(Drill bit will catch on slit) Use finer sand paper and blow lure off between sandings because dust can pack into tiny imperfections that will show up during sealing. Keep lure marked for centering throughout the process. A lot of things were eyeballed which was nerve racking that I'll try to avoid next time. Lure swims great and has a nice slow rise when dead stopped. It is 2.5"s long and made of pine I had laying around that was 5/8's wide. Don't know how this post is going to turn out so Mods if it's screwed up or against the rules--please delete. I enjoyed the experience and I'm glad I quit being a chicken and jumped in...lol